RF Calibration Utility
Airspy HF+ Discovery PPB Calculator
Compute exact crystal oscillator calibration values for hfplus_ppb.exe which can be found in the Firmware Updates (no additional flashing required)
Nominal Range: ±2500 PPB
Standard Reference Stations (Click to load)
Calibration Output
ReadyTarget PPB Value to Write
200
Current (0) + Adjustment (+200)
Outside Typical ±2500 PPB Range
The Airspy HF+ firmware typically expects values between -2500 and +2500 PPB. Double-check that your reference and measured frequencies are both entered in kHz.
>
hfplus_ppb.exe 200
Freq Error (Hz)
+2.00 Hz
Exact PPB Error
+200.00 ppb
Error in PPM
+0.200 ppm
How Airspy HF+ PPB Sign Convention Works
Airspy HF+ calibration compensates for the local reference crystal offset: New PPB = Current PPB + round(((Measured - Reference) / Reference) × 10⁹).
If a 10,000 kHz signal appears higher at 10,000.002 kHz (+2 Hz), adding +200 PPB shifts the receiver's tuned frequency scale down to align the carrier back to 10,000.000 kHz.
Alternative inverted sign (if using external LO):
-200 PPB
Coded in one prompt with Gemini Flash 3.5
Back to radiovibrations.com